Heavy-Duty Steel Rotisserie Bearing / Bracket
- Replacement Heavy Duty Rotisserie Bearing.
This carbon-steel bearing is custom-machined in our shop and is designed to replace the standard bearing. Note that this can be combined with the rotisserie bracket to give extra support on the motor side of the grill. This is all but mandatory on the 12LB drums due to the weight, but can be also employed on smaller drums to take the side load off of the motor shaft. If you are adding extra support to the motor side, be sure to by the bearing/bracket combo unless you already have an extra bracket.
The Bracket is also custom machined in the shop and mates perfectly to the bearing. Use this set if you are replacing a worn out set on the handle side of the rotisserie, or especially if you wish to provide extra support on the motor side of the rotisserie in addition to the standard rotisserie bracket and bearing.
This set will work on the right or left side of the grill.
Notes to be Aware of:
Heavy-Duty Steel Rotisserie Bearing
|Dimensions||1 × 1 × 1.5 in|
Heavy-Duty Rotisserie Bracket
|Dimensions||1.5 × 4 × 6 in|