Heavy-Duty Steel Rotisserie Bearing
- Replacement Heavy Duty Rotisserie Bearing.
This carbon-steel bearing is custom-machined in our shop and is designed to replace the standard bearing. When the standard bearing that is supplied with rotisserie kits wears out, this one will last forever. We have had some complaints about the bearings in the rotisserie kits wearing a groove rather quickly or slicing in half due to weight and friction. It seems consistency in bearing hardness varies from one manufacturer to the next and from one year to the next at the same manufacturer. Note that this can be combined with the rotisserie bracket to give extra support on the motor side of the grill. This is all but mandatory on the 12LB drums due to the weight, but can be also employed on smaller drums to take the side load off of the motor shaft. If you are adding extra support to the motor side, be sure to by the bearing/bracket combo unless you already have an extra bracket.
Notes to be Aware of:
|Dimensions||1 × 1 × 1.5 in|