Blog Topic: Flow-Build your Roaster

Test Fire and First Run
Flow-Build your Roaster

K. Test Firing & First Run

General Information Wash your drum in hot water and detergent before using. A 5 gallon bucket works great, wash the outside, but not the inside,

Read More »
Flow-Build your Roaster

I. Thermometer Installation

 [widgetkit id=”40″ name=”Disclaimer-drill”] I.  THERMOMETER INSTALLATION (Figure 95) Finally we want to install our thermometer.  We need the probe as close to the center of

Read More »
electrical3
Flow-Build your Roaster

H. Electrical & Switch Wiring

[widgetkit id=”38″ name=”Buzzy Electro”] See also:  Electrical Wiring Guide Illustrated HERE: H.  ELECTRICAL & SWITCH WIRING Step 13. Switch Mounting and Wiring. (Figure 59) While

Read More »
oveglove
Flow-Build your Roaster

G. Heat Protection Apparel

[widgetkit id=”37″ name=”Disclaimer-Heat”] The “Ove Glove” is a kevlar/nomex glove that permits handling of the 400-600 degree drum. This is absolutely necessary and you should

Read More »
Flow-Build your Roaster

E. Rotisserie & Drum Setup

[widgetkit id=”33″ name=”Disclaimer shock”] NOTE: The following steps, Figures 11, 12 and 13 are no longer required with the Everything Kits as of March 2013. 

Read More »
Flow-Build your Roaster

D. Materials Setup

[widgetkit id=”35″ name=”Disclaimer-glasses”] (Figure 6) (Figure 7) Step 3.  Get all of your supplies together so you will be able to build quickly and efficiently. 

Read More »