Rotisseries are included in the Everything Kit.  You will need to purchase either an RK Drums Rotisserie or find one at a hardware store, if

(Figure 4) Step 1.  Unbox and prepare your grill for your RK Roasting Setup. (Figure 5) Step 2.  It helps to have good stable ground

[widgetkit id=”35″ name=”Disclaimer-glasses”] (Figure 6) (Figure 7) Step 3.  Get all of your supplies together so you will be able to build quickly and efficiently. 

[widgetkit id=”33″ name=”Disclaimer shock”] NOTE: The following steps, Figures 11, 12 and 13 are no longer required with the Everything Kits as of March 2013. 

[widgetkit id=”36″ name=”Disclaimer Nail”] There are two approaches to motor mounting.  With the two generic grill types, you either have some sort of tray mounted

[widgetkit id=”37″ name=”Disclaimer-Heat”] The “Ove Glove” is a kevlar/nomex glove that permits handling of the 400-600 degree drum. This is absolutely necessary and you should

[widgetkit id=”38″ name=”Buzzy Electro”] See also:  Electrical Wiring Guide Illustrated HERE: H.  ELECTRICAL & SWITCH WIRING Step 13. Switch Mounting and Wiring. (Figure 59) While

[widgetkit id=”40″ name=”Disclaimer Shock”] Provided for ease and convenience, here is the illustrated electrical wiring guide.      

 [widgetkit id=”40″ name=”Disclaimer-drill”] I.  THERMOMETER INSTALLATION (Figure 95) Finally we want to install our thermometer.  We need the probe as close to the center of

General Information Wash your drum in hot water and detergent before using. A 5 gallon bucket works great, wash the outside, but not the inside,

L.  Instructions For Quick-Latch Kit (This is only for pre-2008 drum owners with the old pin & clip system, all new drums come with this